Skip to main content

Mean Arterial Pressure (MAP) & Pulse Pressure Calculator

Calculates mean arterial pressure and pulse pressure from a systolic and diastolic blood pressure reading and compares them with common reference values.

For understanding a reading, not for diagnosing.

Last updatedHow we build & check our tools
Results will appear here once you enter your values.

The two formulas

  • Pulse pressure: systolic minus diastolic.
  • MAP: diastolic plus one third of the pulse pressure.

Worked example: a reading of 120/80 has pulse pressure 40, so MAP = 80 + 40/3 = 93.3 mmHg, within the typical 70 to 100 range, and pulse pressure is around 40. A reading of 140/90 has pulse pressure 50 and MAP 106.7, above range. A reading of 90/60 has pulse pressure 30 (below about 40) and MAP 70.0. A reading of 100/40 has pulse pressure 60 (above about 40) and MAP 60.0, below range.

The two reference values come from textbooks and clinical sources: a typical MAP of 70 to 100 mmHg and a normal pulse pressure of about 40 mmHg. Labels like within range or above range only compare your number to those references.

What this calculator is not

It does not diagnose high or low blood pressure or any heart condition, and it is not a substitute for the blood pressure categories your clinician uses. A single reading can be unrepresentative.

  • Talk to a clinician: about repeatedly high or low readings, or a wide or narrow pulse pressure that persists.
  • Get emergency care (911 in the US): for a very high or low reading with chest pain, shortness of breath, fainting, confusion, or sudden weakness or trouble speaking.
  • Do not change medication: based on a calculated MAP.

Sources

  • Guyton AC, Hall JE. Textbook of Medical Physiology (pulse pressure and MAP estimate).
  • OpenStax. Medical-Surgical Nursing, section 23.1 (typical MAP 70 to 100 mmHg).
  • Cleveland Clinic. Pulse Pressure (normal about 40 mmHg).
  • Evans L, et al. Surviving Sepsis Campaign: International Guidelines for Management of Sepsis and Septic Shock 2021. Crit Care Med 2021;49:e1063-e1143 (initial MAP target 65 mmHg).

Frequently Asked Questions

Common questions about the Mean Arterial Pressure (MAP) & Pulse Pressure Calculator

MAP is the average pressure in your arteries during one heartbeat cycle. Because the heart spends longer in diastole than in systole, MAP is closer to the diastolic number than the systolic one. The tool uses the common resting estimate MAP = diastolic + (systolic - diastolic) / 3. It is an estimate from a cuff reading, not a directly measured value.

Sources & References

Health reference data

Authoritative public-health reference data and definitions from the U.S. CDC.